Contents
If an approaching car is using its high-beams, don’t look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on.
Turn your lights on and off. If the headlights of an oncoming vehicle are blinding, glance toward the right edge of the road instead of looking directly ahead. This should keep your vehicle safely on the road until you pass the oncoming vehicle.
If you are driving at night and a vehicle is approaching with its high beams activated, quickly flash your headlights one time. If the other driver fails to dim their lights, look toward the right side of the road to keep from being blinded by their headlights. Do not retaliate by using your own high beam headlights.
When a vehicle with its headlights on comes toward you at night, you should: Direct your vision toward the right edge of your lane. When driving in precipitation, you should: Use your low beams during the day and at night.
When faced with an oncoming high beam, look down toward the right side of the road to avoid the glare. However, do not completely take your eyes off the road. By slightly lowering your line of sight, you should still be able to see the lines on the road and stay in your lane until the car causing the glare passes.
Focus eyes directly on the steering. Focus eyes directly on the oncoming vehicle? s lights. Increase speed to pass the oncoming vehicle.
Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet.
When approaching the other vehicle from the rear at night, one must dim the high beam headlights within 200 feet of the other vehicle. Explanation : The high beam headlights should be used safely as it can eliminate the road from 350 to 400 feet ahead.
Stay in the center of your lane, blow your horn, and brake. If another vehicle is approaching you head-on in your lane, you should first honk your horn to attract attention. If the other driver does not move over, try to escape to the right.
Safe Following Distance In Poor Weather Conditions
When visibility is low such as light fog, light rain, or nighttime driving, you should double the following distance to a minimum of 4 seconds. This will seem like a large gap between you and the vehicle in front of you.
Most skids occur when conditions are slippery. If you find yourself in a skid, take your feet off the pedals. Stop braking and stop accelerating. Then, quickly turn the steering wheel in the direction you want to go.
Your Headlights and Other Cars
When you are approaching a vehicle, you must switch to your low beam headlights within 500 feet of an oncoming vehicle. When you are following another car, you are required to switch to your low beams within 200 feet of the vehicle in front of you.
Term You can avoid conflicts while driving in heavy urban traffic if you | Definition Focus your attention on driving |
---|---|
Term When meeting an oncoming vehicle at night, you might avoid being momentarily blinded if you | Definition Glance at the right edge of the road |
When oncoming vehicles shine light directly into your eyes, turn your gaze to the white line on the right side of the road, or to where the pavement meets the shoulder, until the vehicle goes by. All cars have day/night interior mirrors to reduce glare from cars directly behind you.
Questions | Answers |
---|---|
When you drive at night you can reduce the problem of glare from the headlights of an approaching car by | Looking to the lower right side of your lane. |
When you drive in heavy fog during daylight hours you should drive with your | Headlights on low beam. |
Under normal driving conditions, your stopping distance at night should be within the range of your headlights. Under normal driving conditions at night, your stopping distance is the distance you travel in four seconds at normal speeds and within the range of your headlights.
Use headlights when visibility is ‘seriously reduced’. Use fog lights when visibility is reduced to less than 100m by fog or spray. Use dipped beam headlights to avoid dazzling other road users when driving at night. Use full beam headlights at night when the road ahead is completely clear.
drive slower as a safety precaution. have only one taillight. reduces the glare from headlights and helps you see better. slowly until your eyes adjust.
If an approaching car is using its high-beams, don’t look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on. If you do, both of you may be blinded.
If you experience sudden sleepiness while driving or notice one of the other warning signs listed above, you should stop driving as quickly as possible. Pull into the next rest stop or any other safe, well-lit space that allows you to safely park and not obstruct the road.
Driving is not a competition, if an oncoming vehicle has already crossed the centerline to overtake, the best and safest thing to do is to give way.
What should you do if an oncoming vehicle seems ready to cross your path? You should slow down and move to the left of your lane. Take extra care if there are stationary vehicles blocking the driver’s line of vision. Sound your horn if necessary.
1. slow until other drivers can return to normal lane. 2. turn on or flash your headlights and blow your horn.
It is best to lower your speed when driving at night. Even with headlights, it will be more difficult to see what is ahead of you on the road at night time. Because your reaction time is slower than it is in daylight, a lower speed is prudent when driving at night.
If someone is following you too closely, be careful. Tap your brake lightly a few times to warn the tailgater that you are slowing down. Brake slowly before stopping. Avoid tailgaters when possible by changing lanes.
You need to save, clear distance ahead of your vehicle in order to see the road and react to changing conditions. By law, you must keep enough space in front of your vehicle so that you can safely stop if the vehicle ahead abruptly stops. In ideal conditions, maintain a four second following distance at all times.
The first thing that should be done when a motor vehicle starts to skid take your foot off the accelerator and steer in the direction of the skid. If you run off the pavement, you should steer straight and slow down before attempting to return to the pavement.
What is the correct response when your vehicle starts to skid on ice? Take your foot off the accelerator, don’t use the brake, turn the steering wheel in the direction of the skid.
If the oncoming vehicle does not dip their high beams, give them a quick on-off flash to remind them their high beams are still on. If they continue toward you with the high beams on, do not put yours on high beams to “punish” them. This may blind them and cause them to drift into your lane.
Related Searches
use your high-beam headlights at night:
when driving in fog, you should
in which situation should you use high beams?
when approaching another vehicle from the rear at night, you must dim your lights
high beam headlights must be used within
high beam headlights must not be used within
within how many feet of an oncoming vehicle should you dim your bright headlights
when driving at night, you should