NANOCLEAR is an extreme high performance scratch resistant automotive clear topcoat built from some of the highest quality raw materials. This high quality urethane hybrid clear can withstand a vast array of punishment that would commonly destroy any other two componant polyurethane available today.
High-solids clearcoat has a higher concentration of resin and a smaller amount of solvent or VOC (volatile organic compounds.) … Low solids is a thinner clear. High solids generally have more UV protection and a deeper appearance when compared to the same amount of applied coats of lower solids.
Coating wood cabinetry, furniture, or trim with a clear finish, whether you stain it or not, gives it richness and depth while protecting it from knocks, scrapes, and the weather. Use this guide to learn more about choosing and using polyurethane, the toughest of the clear coatings.
Re: Is Nason a good clear coat? yes, nason is very good quality.
Great product. Very Pleased. I like the fact that it dries really fast but I put 4 coats of clear on and when its still wet after that last coat it looks really shiny but when It dries it’s almost like it sinks in to the bass coat and all that shine goes away.
You’ll only find that the Subaru’s manufactured in JAPAN have soft paint; those manufactured in the US (Outback, Forester, redesigned Impreza/Crosstrek) have medium-hard clear coat.
The finish looks great, the shine is back and the color matches really well. When spraying the paint, I put on several light coats to prevent running. I suggest looking for a good price on this type of paint. The amazon price fluctuates a great deal and I found it online for $5.50 including shipping.
Modern car paints are nearly always an acrylic polyurethane “enamel” with a pigmented basecoat and a clear topcoat. It may be described as “acrylic”, “acrylic enamel”, “urethane”, etc. and the clearcoat in particular may be described as a lacquer.
Clear nail polish is just that — nail polish, which is prone to chipping and peeling off, and not meant to be worn as a top coat. A top coat, on the other hand, acts as a sealant or protector for the nail against chips and scrapes.
Their thicknesses vary by quite a lot by all accounts from manufacturer to manufacturer, as does their hardness so based on that there must be a difference.
You need 2 coats with one being for UV protection and the second for longevity and again, a third so you can sand & buff it if needed. I guess my coats are on the heavy side since I spray until the clear looks like how want the finish job to look.
MS (medium solids) – the resin particles are larger compared to HS or UHS clearcoats. … HS (high solids) – the resin particles are smaller compared to the MS ones, and the amount of solvent is around 15% (usually around 420 g/l).
Wet-sand the base coat before starting the clear coat. Wet sanding makes the surfaces smoother. It is often a step in polishing cars and other items.
Despite being available in variances, polyurethane is more durable. It is thick and leaves a strong coating. Lacquer is thin and penetrates the wood surface. It is also durable but susceptible to scratches and discoloration after some time.
Oil-based polyurethane is very durable, making it the best choice for refinishing wooden floors or furniture that gets a lot of use, such as a table. … Polycrylic is a water-based product that is far less smelly and toxic than either type of polyurethane, making it easier to work with.
Best after full cure (7 days @ 77°F/25°C). Store in a dry, well ventilated area. Storage temperatures should be between -30°F (-34°C) and 120°F (48°C). These directions refer to the use of products which may be restricted or require special mixing instructions in VOC regulated areas.
Axalta Coating Systems
And remember… Nason Finishes is produced by Axalta Coating Systems, a world leader of respected and trusted refinish paint brands.
You can use their 1k clear over either of those, and then use the 2k Spraymax or Shopline 2k clear over it after cure and wet sand. Thanks Yamahawk, I am using Duplicolor enamel paint and Spraymax 2K i will let the paint sit for at least a week before i spray the clear.
Dupli-Color® Hi-Build Fleet Coating is a high-solids enamel paint that provides superior coverage and durabil…
Nothing beats wood lacquer for thick build up. Some woodworkers use polyurethane, some like varnish or shellac, but all of the latter products take forever to use and leave a rubbery finish that’s tacky and it smudges.
If you want to be environmental-friendly and look for a more natural look, then shellac is a suitable choice. If, however, you need a modernistic look to your wood and you want a clear finish, then polyurethane varnish will satisfy your requirements.
Registered. The clear coat is hard Will, as for the Brilliant Black, I don’t know whether Audi use a clear coat on top of this but generally Solid colours are soft as a result of them no longer being solvent based.
Lexus paint/clearcoat is extremely soft which means even drying it off with microfibers will create swirls in many cases if you are not really careful and gentle but it also means that you don’t have to go very aggressive with polishes/polishing to get rid of defects.
Typical audi thickness is 120-150 microns including primer, color and clear. That is my personal rule based on measuring a lot of audis, it is a generalization and generalizations can be dangerous. 30 microns of variance on a car is not uncommon.
best clear coat spray paint
what is the best clear coat for automotive
automotive clear coat near me
hardest automotive clear coat
best automotive clear coat 2019
best clear coat for custom cars
best clear coat spray paint for cars
ppg clear coat