Since 1924, the American Petroleum Institute has been a cornerstone in establishing and maintaining standards for the worldwide oil and natural gas industry.
The American Petroleum Institute gravity, or API gravity, is a measure of how heavy or light a petroleum liquid is compared to water: if its API gravity is greater than 10, it is lighter and floats on water; if less than 10, it is heavier and sinks.
American Petroleum Institute (API) standards advocate proven, sound engineering and operating practices and safe, interchangeable equipment and materials from drill bits to environmental protection.
API stands for the American Petroleum Institute, which is the major United States trade association for the oil and natural gas industry. The API represents about 400 corporations in the petroleum industry and helps to set standards for production, refinement, and distribution of petroleum products.
Also, don’t let price guide you. Engine oils with a Service Classification prior to SN (including SA) are often priced close to that of API SN. The service rating of passenger car and commercial automotive motor oils is classified by the American Petroleum Institute (API).
A crude oil will typically have an API between 15 and 45 degrees. Higher API indicates a lighter (lower density) crude. Lower API indicates a heavier (more dense) crude. Generally, lighter (high API) crudes are more valuable because they yield more high-value light products when run through a refinery.
An API (Application Programming Interface) is a set of functions that allows applications to access data and interact with external software components, operating systems, or microservices. To simplify, an API delivers a user response to a system and sends the system’s response back to a user.
Locate the API number somewhere on the base of the oil or gas well. This number is usually clear and easy to find. The paperwork associated with each well describes the exact location. Each API number has up to 14 digits, divided by dashes.
API stands for the American Petroleum Institute. The organization evaluates every blend of motor oil. It assigns an API rating to motor oil blends that meet ILSAC’s current standards. ILSAC stands for International Lubricant Standardization and Approval Committee.
API specifications are recommended practices developed based on insight gleaned from the petroleum and petrochemical industry – which makes sense given that API stands for American Petroleum Institute. API standards are intended to encourage safety in the oil and natural gas industries specifically.
API stands for American Petroleum Institute. In 1970, along with the SAE and ASTM (American Society for Testing and Materials), they established the API Service Classification System to define the performance level of a given oil, unrelated in the main, to oil viscosity.
API SN. Premium multi–Grade Gasoline Engine Oil is formulated with highly refined base stocks and selected DI Packages which provides excellent wear control.
Therefore the first three letters you need to know are SAE, the acronym of the Society of Automotive Engineers. This society is responsible for establishing a classification system based solely on oil viscosity.
Although variously defined, the upper limit for heavy oils has been set at 22°API gravity and a viscosity of less than 100 cP. The portion of heavy oil having an API gravity of less than 10°. Also known as “oil sands,” bitumen shares the attributes of heavy oil but is even more dense and viscous.
The formula for API gravity is API = (141.5/SG) -131.5 where SG is the specific gravity of the petroleum liquid being measured. For example, for an API gravity of 50, add 131.5 to obtain 181.5. … Multiply the specific gravity of the oil by the density of water to obtain the density of the oil.
Yes! The following Pennzoil products are all licensed by the American Petroleum Institute as complying with the specifications of the new API SN PLUS category: Pennzoil Platinum Full Synthetic Motor Oils – SAE 0W-20, SAE 5W-20, 5W-30 and SAE 10W-30.
Venezuela is the country with the most crude oil reserves in the world: 303.81 billion barrels. The best-quality crude oil is found in Malaysia.
API is the acronym for Application Programming Interface, which is a software intermediary that allows two applications to talk to each other. Each time you use an app like Facebook, send an instant message, or check the weather on your phone, you’re using an API.
Current API numbers are assigned by regulatory agencies, usually the oil and gas commission for the state where the well was drilled. These numbers are assigned as part of the well permitting process, and they may be the same as the well permit number. … In the example above, 42-501-20130 is a current number.
The API key is a unique identifier that authenticates requests associated with your project for usage and billing purposes. You must have at least one API key associated with your project.
|American Petroleum Institute Gasoline Engine Oil Service Classifications|
|SM||Current||For 2010 and older automotive engines.|
|SL||Current||For 2004 and older automotive engines.|
|SJ||Current||For 2001 and older automotive engines.|
The “S” series is composed of SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM and SN. SN oils provide higher levels of performance than all the other “S” oils. API Categories SA through SH are obsolete, and oils labelled SN can be used in their place.
Service. CK-4. Current. API Service Category CK-4 describes oils for use in high-speed four-stroke cycle diesel engines designed to meet 2017 model year on-highway and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines.
An API specification provides a broad understanding of how an API behaves and how the API links with other APIs. It explains how the API functions and the results to expect when using the API.
Synthetic-blend motor oil is the best of both worlds. It is a mixture of synthetic and conventional base oils with additives found in both. It has excellent engine protection properties at a lower cost than full synthetics. Full-synthetic motor oil is ideal for vehicles that demand ultimate levels of protection.
what does api stand for in oil and what does it rate
api number oil and gas
api standards list 2020
oil and gas standards pdf
api standards for oil and gas industry pdf
api standards pdf free download
api standards and guidelines