How To Unlock Theftlock On Gm Radios? new for 2022

How To Unlock Theftlock On Gm Radios?
How To Unlock Theftlock On Gm Radios?

Theftlock is a security feature that is found on many General Motors (GM) radios. This feature is designed to prevent theft of the vehicle, but can also be a nuisance if you need to unlock the radio for service or repairs.

If you have ever had to deal with Theftlock, you know how frustrating it can be. This security feature can be difficult to unlock, and there is no one-size-fits-all solution.

Amortips has created this guide to help you on How To Unlock Theftlock On Gm Radios?. Our guide includes step-by-step instructions, as well as video tutorials and troubleshooting tips. We also provide information about the different types of Theftlock systems that are used in GM vehicles.

How To Unlock Theftlock On Gm Radios?

How To Unlock Theftlock On Gm Radios?
How To Unlock Theftlock On Gm Radios?

If your GM car radio says “Theftlock” on the display, it means the radio is locked and cannot be used. This can happen if your car is stolen or if you lose your car keys. To unlock the radio, you’ll need a special code.

To get the code, you’ll need to contact a GM dealership or a locksmith. The dealer should be able to give you the code for free, but a locksmith may charge a fee. Once you have the code, enter it into the radio and the theftlock will be released.

It’s an easy process, as long as you have the necessary information. To reach GM’s toll-free radio hotline, call 1-800-537-5140. You’ll be asked to provide your car’s radio identification number and a special dealer access code once you’ve connected. A 4-digit retrieval code will be given to you, which may be used to unlock your radio after this procedure is completed successfully.

Finding Your Radio Identification Code

  • Turn on your radio and insert your key in the ignition. Start your car as you normally would, or turn the key to “On” or “Accessory.” Then, to turn on the radio, press the power button on the radio’s volume dial. If the radio is locked, the digital display will show “LOC.”
  • Take a piece of paper and some writing utensils with you. To access your Theftlock radio, you’ll need to enter a four-digit numerical code. However, before you can do this, you must first write down two separate three-digit numbers that will be provided to you by punching specific buttons on the radio’s interface.
  • To find your radio’s identification code, press and hold buttons 1 and 4 until a 3-digit number appears on the display. This may take up to 10 seconds. Once it does, write down the numbers quickly and accurately – these are the first 3 digits of your ID code.
  • After pressing the AM/FM button, the second half of your radio identification number will appear on the display. On the radio’s screen, three more digits will show up after you press the button. These are the final three digits of your radio’s identification code. Keep track of the first three digits and these additional numbers.
READ:  What Is An Axle Seal?

Phoning in for Your Radio Retrieval Code

  • To retrieve your car radio’s code, dial GM’s toll-free radio hotline at 1-800-537-5140. You will be asked for your vehicle identification number and a special dealer access code. In return, you’ll receive a 4-digit retrieval code to unlock yourradio.
  • When prompted for a dealer access code, input “106010.” This is the most frequent code used by GM employees to reset stolen Theftlock radios. Carefully enter each digit, then press the # sign to submit your request.
  • When prompted, punch in the six-digit radio identification number of your vehicle. Using your phone’s keypad, input the two three-digit numerical codes you wrote down previously in a single unbroken sequence. Then press and hold the * sign to receive your radio retrieval code.
  • The automated voice on the other end of the line will recite a 4-digit code to you. Be sure to neat and precisely record these numbers down, as they are what you will use to unlock your radio. Once you have this information, feel free to hang up the phone.

Using Your Radio Retrieval Code to Unlock Your Radio

  • To figure out the first half of your radio retrieval code, press the hour button on the radio until the first 2 digits of the code appear. The number displayed will increase with each button press. Continue to tick off the hours in the hour position until they correspond to.
  • To view the last two digits of your retrieval code, hit the minute button. To finish entering the code, do the same thing you did to input the first two digits but this time with the numbers in the minute position. Before moving on, double-check that each digit of the code is correct.
  • To unlock your radio, press the AM/FM button. The display should now read “SEC,” meaning that the radio has been successfully unlocked. Switch on the radio and select your preferred audio input, and it should play as normal. It’s as simple as that!
  • You can clear an “INOP” message by leaving your battery on for 1 hour. Some Theftlock radios will shut down if you enter an incorrect radio retrieval code too many times, and when this happens, the display will read “INOP,” which stands for “inoperable.” To fix this problem, simply leave the key in the “On” position for a full hour and wait for the message to disappear.

How Do I Bypass Theft Lock on a GM Radio?

How Do I Bypass Theft Lock on a GM Radio?
How Do I Bypass Theft Lock on a GM Radio?

Theftlock is a security system that GM implemented in the early 1990s. It uses a radio’s identification number to lock the unit if it’s ever stolen, so that a would-be thief cannot reprogram the radio to work in another vehicle.

If you buy a used car that has this type of theft protection, you’ll need to know how to bypass it before you can use the stereo. Here are a few ways to do that:

  • Look up the radio’s activation code in the owner’s handbook if you have it. Because each automobile has its own activation code, you must discover the correct one for your car. After you’ve entered the code, turn on the stereo and try to unlock it again.
  • If you’re missing the manual that has the code, try searching online. More likely than not, somebody has already looked up and posted the code for your particular GM car model. Do a search using this formula: “[vehicle make] + radio unlock code.”

There are a few things to bear in mind while bypassing the Theftlock system on your GM vehicle radio. The first is to double-check that you have the correct activation code. If you input the incorrect code too many times, it may permanently lock up the device.

READ:  How Long Is A F350 Short Bed?

Second, if you don’t have access to the owner’s handbook, be careful which website you get your code from. Before entering the code, make sure it’s a trustworthy site.

Can I Obtain a Radio Code From My Vehicle Identification Number (VIN)?

Can I Obtain a Radio Code From My Vehicle Identification Number (VIN)?
Can I Obtain a Radio Code From My Vehicle Identification Number (VIN)?

If you have the radio’s serial number, you may be able to obtain the code from a GM dealer or a licensed locksmith. However, if you don’t have the serial number, you can still try to get the code from the Vehicle Identification Number (VIN).

To get the code from your VIN, take these steps:

– Contact your local GM dealership and give them your VIN.

– Ask if they can provide you with the radio code.

– If they can’t help, try contacting a locksmith. Some locksmiths may be able to generate a code based on your VIN.

If all else fails, you can always reach out to GM’s customer service hotline at 1-800-222-1020. They may be able to help you obtain the code you need to unlock your radio.

Keep in mind that it’s always best to get the code from the owner’s manual or from GM directly, if possible. If you have to resort to using your VIN, there’s a small chance that the code might not work. In any case, hopefully, one of these methods will help you bypass the theftlock on your GM car radio.

How Do I Disable Theft Lock?

How Do I Disable Theft Lock?
How Do I Disable Theft Lock?

Theftlock is a system created to make your vehicle’s radio less desirable to thieves. If your car is stolen, the radio will be locked and the thief will need a code to disable it. This code can be given by GM dealerships or independent locksmiths.

Once you have the code, follow these instructions:

To disable the radio:

  • Start by turning off the ignition
  • Then, locate the fuse box and remove the radio fuse
  • After that, wait 30 seconds before reinserting the fuse and turning onthe ignition again
  • Finally, enter in a four digit code followed by either pressing “AM” or “FM”

You will have five chances to enter the correct code before the flock permanently locks your radio. If this happens, you will need to take your vehicle to a GM dealership to have the radio unlocked. In the meantime, wait two minutes in between each incorrect code entry.

How Do You Reprogram a GM Radio?

How Do You Reprogram a GM Radio?
How Do You Reprogram a GM Radio?

If you need to reprogram your GM radio, there are a few different ways that you can do so. The first is by visiting your local GM dealership. They will have the necessary equipment to program your radio and can usually do it while you wait.

Another option is to contact a licensed locksmith in your area. Some locksmiths may be able to generate a new code for your radio based on your VIN.

Finally, you can always reach out to GM’s customer service hotline at 1-800-222-1020. They may be able to help you obtain the code you need to unlock your radio.

Keep in mind that it’s always best to get the code from the owner’s manual or from GM.

You will need two things to reprogram a GM radio: the Radio ID and Security Code. The Radio ID is individually assigned to each radio unit; you can find it on a label next to or above your radio unit.

F.A.Qs: How To Unlock Theftlock On Gm Radios?

How do I unlock my radio without the code?

Turn on your radio and check if it displays CODE or LOC. If it does, disconnect the radio. For about 50-60 minutes, press and hold down the audio power button with the SEEK button. Then, when you turn it on again without using the radio code, it will do so without any problems.

READ:  What Does It Mean When My Abs Light Is On?

How do I unlock my Chevy utility radio?

Turn your vehicle’s ignition on and press the radio power button. Your radio will display “LOC.” Step 2: Enter the first two digits of your radio unlock code. To input the first two digits of your radio unlock code, use the hour button on the radio.

How do I reset my anti theft radio?

To turn the unit off, press either the “Source” or “Power” button. If you want to reset the clock, begin by holding down the “Minute” button (it’s on the left side of your GM vehicle stereo’s display). After a few seconds, release it when 0000 appears in the screen.

Can I get radio code from VIN number?

The code that you need is located on a card, which should have come with the purchase of the vehicle. If you don’t have this card, don’t worry! You can simply call the dealership with your radio’s serial number and Vehicle Identification Number (VIN), and they will give you the code over the phone.

How do I find the security code for my car radio?

The owner’s handbook for your automobile is the best location to look for a radio code. In most situations, the owner’s handbook will be in your glove box and will provide basic car maintenance instructions as well as instructions on how to operate each system on the vehicle

How do you take theft lock off radio?

Cars with PassLock or Theftlock

  1. To start, use an original key (not a copied one) and insert it into the ignition.
  2. Next, turn the key to the “On” position and wait for 10 minutes until you see the “Theft System” light stop flashing and go off.
  3. After that, flip the key to the “Off” position for five seconds.

What is the anti theft code for radio?

A car radio code is a short string of numbers that corresponds with a security feature on some head units. The purpose of this code is to prevent theft by making the head unit unusable when it’s disconnected from the battery. However, this feature can also be activated if your battery dies.

How do you enter the security code on a rav4 radio?

The following figure demonstrates how to press each preset button in sequence using the first number of the stereo code. If, for example, the security code begins with “4,” push the fourth preset button below the stereo display. To go to the next digit in the code, press and hold down the right arrow until you see a “2.” Use preset buttons to input all remaining digits.

How do I reset my GM radio?

To do a complete reset of your Chevy MyLink system, press and hold both the Home and Fast Forward buttons at the same time for 10 seconds. Once the system reboots, any issues you were experiencing should be resolved.

How do I reset my GMC radio?

Just follow the steps below:

  1. On your GMC IntelliLink home screen, choose ‘Settings.
  2. Select ‘Return to Factory Settings’ from the drop-down menu. …
  3. Click ‘ Continue,’ then follow the on-screen instructions.
  4. When prompted to either continue or cancel, click ‘Continue.’

Conclusion

If you have a GM radio with Theftlock, there are several ways to unlock it. We’ve outlined the three most common methods in this blog post. Have you had trouble unlocking your Theftlock radio? Let us know in the comments.

Related Searches

how to bypass theftlock on gm radios
gm radio codes free unlock
how to unlock gm radio
gm radio vin unlock
how to unlock gm radio 2012
gm radio unlock codes list
how to get theft lock off radio
theftlock radio

See more articles in category: FAQ