How To Unlock Chevy Silverado Radio? new for 2022

Contents

How To Unlock Chevy Silverado Radio?

Press the Hour button on the radio until the first two number of the code appear. Next, press the Minute button until the last two numbers of the code are displayed. Once all four digits appear, press the AM/FM button to unlock your stereo.

How do I reset my radio in my Chevy Silverado?

To reset the radio in your 2015 Chevy silverado vehicle, turn the ignition key to the “on” position and turn your radio on, wait ten seconds and then turn your radio off. Depress radio power button again and wait for reset.

How do I unlock my radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.

How do I bypass Theftlock on a GM radio?

To disable the Theftlock feature, enter the user or factory back-up code as follows:
  1. Write down the user or factory back-up code.
  2. Turn the ignition to ACCESSORY or RUN.
  3. Turn the radio OFF.
  4. Press the 1 and 4 buttons together. …
  5. Press the Minute button and “000” will appear on the display.
READ:  How To Get Paint Off Of Your Car?

How do you take theft lock off radio?

Cars with PassLock or Theftlock
  1. Use an original key (not a copied one) and insert it into the ignition.
  2. Turn the key into the “On” position. …
  3. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
  4. Flip the key into the “Off” position and leave it there for five seconds.

How do I unlock my 2015 Chevy radio?

How to Unlock a Chevy Radio
  1. Start the car and turn on the radio.
  2. Press down on preset numbers two and three until a three-digit number displays on the radio. …
  3. Push the AM/FM button and a new three-digit number will display. …
  4. Call 1-800-537-5140. …
  5. Enter 106010, and then press *.

How do I unlock my 2001 Silverado radio?

Can I get radio code from VIN number?

The code is located on a card that comes with the original purchase of the vehicle, which we don’t have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle and ask for the radio code.

Where can I find my radio code?

The best place to locate a radio code is in the owner’s manual of your car. In most cases, the owner’s manual will be located in your glove box and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.

How do you unlock a car radio with a code?

How do I get the radio code for my Chevy utility?

From any landline or cell phone, call the toll-free GM Radio hotline at 1(800) 537-5140. Step 2: Enter the code. When it requests a code, enter “106010” on the keypad, followed by the pound (#) sign. Step 3: Enter the radio serial number.

How do you unlock a Delco Theftlock radio?

How do I disable theft lock?

Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.

How do you unlock the radio in a 2000 Chevy Silverado?

Use the following instructions to reterive the internal radio unlock codes: Press and hold push buttons 2 and 3 until a three digit code appears on the display. Write the three digit code on a piece of paper. Press the AM/FM push button, a three digit code will appear on the display again.

How do you unlock a 2008 Chevy radio?

Step 1: Start the vehicle and turn on the radio. The radio will display “LOC” indicating the Theftlock system is activated. Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don’t have a fourth preset button, press and hold presets 2 and 3.)

How do I get my car out of anti theft mode?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

How do I unlock my 2013 Silverado radio?

To unlock the radio in the 2013 Chevy Silverado You will start by turning on the vehicle. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.

How do you unlock a 2006 Chevy radio?

How do you unlock the radio on a 2014 Camaro?

How to unlock your radio:
  1. Press and hold the preset button 2 & 3 or 1 & 4 for older radios, about 6 to 9 seconds Until the first 2 or 3 digits of the display code are displayed.
  2. Write the numbers down.
  3. Press the AM/FM button; write down the next 2 or 3 numbers.
  4. Call 1-800-537-5140.
READ:  How To Polish A Run From Clear Coat?

How do you unlock a 2003 Chevy Silverado?

How do you reset the security system on a 2002 Chevy Silverado?

To reset Your 2002 Chevy Silverado security system put the key in the ignition, turn the key to the on position, and leave it on until the security light goes out. Usually 15min. Once this happens crank the truck without turning the key backward, just turn to start.

How do I reset my car stereo to factory settings?

Remove the faceplate from your car stereo. Press the RESET button on the front panel using a pointed object, such as a ball-point pen.

How do I reset my car radio code?

Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.

What are the radio ten codes?

10-Radio Codes
  • 10-1 Receiving Poorly.
  • 10-2 Receiving Well.
  • 10-3 Stop Transmitting.
  • 10-4 Acknowledgement.
  • 10-5 Relay.
  • 10-6 Busy.
  • 10-7 Out of Service.
  • 10-8 In Service.

Why is my car radio asking for a code?

Every time the battery is disconnected or becomes completely dead the radio will ask for the code. In most cases, you can just press and hold the power button for 2 seconds and the radio will automatically reset and start working properly without entering the code.

Why does my radio not work after changing battery?

The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed. When that happens, all you have to do is enter the right car radio code, and you’re back in business.

What is the anti theft code for radio?

Keep those numbers handy

READ:  What Does The Car Lock Symbol Mean?

A car radio code is a short string of numbers associated with a security feature found in some head units. Its purpose is to prevent theft by rendering a stolen head unit useless when it’s disconnected from the battery. However, ​this feature also kicks in if your battery dies.

How do you unlock the steering wheel?

Here’s How to Unlock a Steering Wheel
  1. Insert your key.
  2. Put pressure toward turning the key and maintain that pressure.
  3. Wiggle your steering wheel left or right, or up and down.
  4. Jiggle the key until it turns.
  5. Turn your car on, all done.

How do I unlock my RDS radio?

To unlock radio you will need access to a GM scan tool. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds.

How do I unlock my 2016 Chevy Malibu radio?

Registered
  1. Turn the ignition ON (The radio should display “LOC”)
  2. Hold down the Radio Presets 2 and 3 buttons for six seconds.
  3. The radio display changes from LOC to a three-digit number. …
  4. Press the AM/FM button.
  5. The radio display changes to another three-digit number.

How much does it cost to unlock GM radio?

How much does it cost to unlock a GM radio? They usually charge a small (around $10) fee. Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear.

How do I reset my Delco radio?

Turn the ignition key to the “ON” position, without turning the engine over. Hold the preset buttons “2” and “3” for 10 seconds. The radio will display a three-digit code.

How do I add an AUX to my Delco radio?

How do I know if my car is in anti theft mode?

If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.

How do I disable GM anti-theft system?

How to Disable a GM PassLock System
  1. Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
  2. Look at the dashboard and locate the theft system light. …
  3. Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

How to Unlock a GM Theftlock Radio (Simple & Easy Steps!)

Related Searches

how to unlock chevy radio 2008
how to unlock chevy radio 2013
gm radio unlock codes list
2011 chevy silverado radio locked
how to unlock gm radio 2012
gm radio codes free unlock
how do i unlock my chevy malibu radio
how to unlock gm radio 2010

See more articles in category: FAQ