Dentists who work for dealerships and franchise body shops will usually fix small dents, but their rates are generally much higher than those of smaller outfits that can provide the same quality level. And because many dent specialists are mobile these days, having repair work done can be quick and convenient.
Most dentists will come to your home or office and fix a dent in 20 minutes or less if there is only one dent, but it may take longer if there are multiple dents.
Checking online reviews can help you find a reputable dent specialist. This is especially important when choosing someone to work on your teeth, as some repairs may require touch-up paint while others will not.
Prices for various types of dents vary, but typically range between $60 and $110. Additionally, if there are multiple dents, it might be cheaper to get them all fixed at once rather than going one by one.
Dents over six inches in diameter can cost anywhere from $200 to $350 to repair, depending on the location and make and model of the car.
If the paint is damaged, however, large dents may not be within the scope of a mobile dent specialist. In this case, an auto body shop may be necessary.
If the dent is small and there is no damage to the paint, some car owners may choose to repair it themselves using household items. None of these methods are guaranteed to work, but they are all worth trying if saving money is a priority. If repairing the dent fails, a specialist can be reached for assistance.
The first method for fixing dents involves using a hairdryer, aluminum foil, and a small block of dry ice. First, heat the dent with the hairdryer until it is hot.cover the dent with aluminum foil and wait about 30 seconds. Then rub dry ice over it until it pops out
Boil water and then push the dent out from behind it.
A plunger can be used to repair dents in metal, especially those that are wider and shallower than a typical one-inch ding. Simply pour water over the dent and use the plunger in a gentle push-pull motion. If this method does not work within the first few tries, try another method.
To create a vacuum effect, first make a hole in the bottom of a food storage container. Place the container over the hole and let the vacuum cleaner suck out all of the air through the hole. The dent should pop out in less than a minute.
If none of the household methods work, it may be time to invest in a dent removal kit. These kits are often successful at popping most minor dents. You can purchase one at an auto parts store, and it will cost less than hiring a professional. Plus, you can use these kits for future dents.
The plunger is a tool that can be used to remove dents from objects. It has suction that can help to pop the dent out of place.
This method should only be used on plastic parts of your car. It can cause damage to other parts of the car if done incorrectly.
Step one – Pour boiling water over the area that has been dented. This will soften the surface and make it more malleable.
Step two – Place the plunger over the dent, ensuring it is fixed in an airtight position and pull.
Step three – If the dent doesn’t seem to be popping out of its original place, you can try pushing it from behind with gloves on.
Step four – The damage should have disappeared due to your vigorous efforts to clean it.
Top tip: If you need to repeat the steps again, wait 24 hours before exposing your car to extreme temperature changes.
Dryers are typically better suited for use in salons than garages, but with the right technique, you can save money on car repairs.
If you are confident that you can repair the dent yourself, you will need a few supplies. These include a jack, a wrench, and some spare parts.
Step one – To inspect the dent in detail, you will need to access both sides of the car. This could mean opening the bonnet or reaching underneath.
Step two – It is time to plug in the hair dryer. Hold the hair dryer at a distance of five to seven inches from the affected area on a medium heat setting and wait two minutes. After two minutes, if the panel has softened enough, proceed to step 2.
Step three – To repair a dent in your car, first make sure it is stable by pushing down on the edges and testing for movement. If the panel feels stiff, use a hair dryer on low heat to soften it up again.
Step four – Open the can of compressed air and shake it well. Turn it upside down and spray the dent with its nozzle.
Step five – Wiping any liquid residue away is a job done.
Top tip: If this method doesn’t work as planned, you can repeat the steps for better results. Try leaving a day between exposing your car to extreme temperature changes.
This vacuum cleaner uses vacuum suction to create an airtight seal on flat surfaces. It is best used on flat surfaces to help create a vacuum.
Step one – To cover the dent with a plunger, place the top of your bucket or bowl over the dent and push and pull until the dent is covered.
Step two – Cover the hole in the bucket/bowl with your vacuum cleaner and turn it on.
Step three – Your therapist should notify you if the position of your bodywork changes, as this may indicate that your treatment is succeeding.
Top tip: A powerful vacuum cleaner could make all the difference. Try hiring a professional model if your everyday appliance isn’t up to the task.
This method uses extreme changes in temperature and requires the use of protective gloves.
Start by repeating steps one and two from the hair dryer method above.
Step three – To fix aluminium foil over a dent, tape it securely to the paintwork using masking tape.
Step four – Wearing heavy-duty gloves, pick up a block of dry ice and rub it across the foil. After a few seconds, you should hear the panel pop back into place.
Step five – After removing the foil, you will be able to marvel at your hard work.
If you have a large or oddly-shaped dent, it may be time to use a glue gun to create handles that can be pulled out of the spot to fix it. This method is effective at fixing larger or oddly-shaped dents in place.
Step one –To test the glue gun’s effectiveness, try using it on an inconspicuous area of your car to see if it won’t damage your paintwork.
Step two – Drill two screws into the ends of the wooden dowels, and drill screw holes in either side of the cylinder shape to create handles. You’ll need one handle per square inch of damage.
Step three – Apply the adhesive to the end of the dowels, then fix them around the dent.
Step four – Your hair will be dry in 10 minutes. You may want to use your trusted hairdryer at this point.
Step five – To remove a dent from a surface, first pull the handles outwards until the dent pops out. If necessary, repeat the steps by placing the dowels in different positions.
Step six – Remove the dowels and wash away any leftover glue. If there are any remaining dowels or glue on the project, remove them with a knife or a wire brush. Then, washes away all of the adhesive with hot water and soap.
Top tip: Try fixing the dowels to the edges of the damaged area first before working your way into the middle of the dent.
Some people believe that buying tools specifically made for the job is the most effective approach.
There are three main types of dent repair kits:
If you are not sure if you want to do the job or need help, please contact an RAC approved garage for assistance.
The doors of a car are typically thinner than other parts of the vehicle, which makes them more susceptible to damage. However, they are also easier to remove for repairs.
To remove wiring or control panels from arm rests, you will likely need to pop open screw covers and unfasten everything.
If you want to reuse the door panel, try to keep it as flat as possible so that the plastic sheet attached to it can be used again.
If the dent is located on the rear of the car, use a screwdriver to push it out from behind. Once it’s removed, you can pop your bodywork back into place.
Boil some water in a pot, and throw it on the dent.
After you’ve poured the water, reach behind the bumper and try to pop the dent back in. The heat of the water may make the plastic more flexible, making it easier to put back into place.
Avoid using boiling water to fix a dent in a metal surface, as the heat will not last long and may cause damage. If the dent does not completely go out with boiling water, continue to dump hot water on it until it pops back out.
Poking a dent out from the top is not the best way to go about it, as this will only cause more damage and frustration.
George Gjokaj, a master PDR technician, uses a combination of a long metal rod underneath the dent and a knockdown or tap down tool on the top side to completely get the dent out of the car. This method is often successful in removing dents from cars.
If you are having difficulty removing a dent from your car, there are several options available to you. One is a Pops-a-Dent, or a suction cup dent remover tool.
If you’re willing to try anything, a dent removal kit is a good place to start. It typically contains tools designed for removing car dents using many of the methods detailed above.
Some people try to remove dents and dings from their vehicles themselves, while others hire an auto body shop. If you used a different DIY method for removing dents and dings from your vehicle, please let us know below.
The decision to repair a dent yourself depends on a combination of things:
It is easy enough to fix small dings in your car, but more extensive damage will probably need the help of an expert.
There is a wide range of rates for bodywork specialists, with some charging £36 to £200 an hour.
If you can’t repair something yourself, you might need to find a professional to help. Repairs can seem daunting if you’re not comfortable doing them, so it’s best to get help from someone who knows what they’re doing.
Finding the best tools and materials for a repair project can take some time, especially if you shop around for the best deal. There are many different types of tools and materials that can be necessary for a high-quality repair job, so it is important to learn how to use them properly.
If you need help restoring your car, an RAC approved garage will be happy to assist you.
He boils some hot water in a pot and pours it over the dented areas. The heat makes the metal more expandable, so it can be easily pushed and pulled. This allows the parts to return to their original shape, which is much more likely given that the car’s original design was followed.
To remove a dent from a bumper, you will need a pot of very hot water and a simple plunger. First, place the plunger over the indented area and pull straight out. If you are working on a bumper, you can also reach behind the dented surface to push the dent out.
Before applying tools, try using hot water to smooth out the dented surface. This may help the metal flex and pop back into its original form.
If you have a dent in your car door, be sure to consult a professional. They will be able to help you fix the door and avoid having to replace it.