How Much Does It Cost To Drop A Gas Tank? Cost To Replace A Fuel Pump new for 2022

Gas prices are on the rise and show no signs of stopping. For many people, this means they’re looking for ways to save on gas.

One way to save money on gas is by dropping your tank. This can be a difficult and dangerous process, but it’s worth it if you can save $10 or more each time you fill up.

Amortips has created the “How Much Does It Cost To Drop A Gas Tank? Cost To Replace A Fuel Pump” article, which is the perfect resource for anyone who wants to know the cost of dropping a gas tank. We provide accurate and up-to-date information on the cost of dropping a gas tank, so you can make an informed decision about what’s best for you.

How Much Does It Cost To Drop A Gas Tank?

The cost of dropping a gas tank varies depending on the make and model of your vehicle, as well as whether you choose to do it yourself or have a professional mechanic do it for you.

If you opt to do it yourself, the main cost will be for the rental of a floor jack, which can range from $20 to $50 per day. You may also need to purchase new straps or other hardware to reattach the fuel tank, which can cost around $10.

If you choose to have a professional mechanic drop the gas tank for you, labor costs will vary depending on your location and the specific shop you use, but they can range from $50 to $100 per hour. In addition, you will need to pay for any parts that need to be replaced, such as a new fuel pump or fuel lines. The cost of these parts will depend on the make and model of your vehicle.

The typical gasoline pump costs between $100 and $200, depending on the car, and that is just for the component. If you have the misfortune of owning a car that needs the tank to be lowered, you may be looking at total parts and labor costs of $400 to $600.

That is, of course, if the lines stay intact and the repair proceeds well. Many times, the sending unit (a collection of tubes and pipes that lock onto the top of your gasoline tank and contain the pump itself) is severely corroded and rusted. This item is held in place by a locking ring.

If there are any problems with the transmitting device, the price might quickly rise. They usually rust out rather than go bad. As a result, they are not updated often, making them more costly and, at times, difficult to locate. On most models, replacing a sending unit along with the pump may push the total cost of the repair far above $1,000.

Cost of replacing a Fuel Tank

The cost of replacing a car’s gasoline tank varies depending on the vehicle and the mechanic/dealer you choose. According to our study, if you engage a professional, the expenses, including components, will vary from $250 to more than $700 to replace only the tank. If the technician replaces the gasoline tank with a new pump and sending unit, the cost might reach $1,000.

Most of the time, failure rates will vary drastically depending on your environmental circumstances, as salt, sand, humidity, and water may all damage a gasoline tank, ultimately leading to corroding. Even though many modern cars employ a polyethylene tank, the integrated components might still fail.

The gasoline tank alone, without any professional work, may cost between $100 and $300 for the component and another three hours for labor, which can cost another $300 or more depending on the area average.

What things need to be replaced when you replace a fuel tank?

This question largely boils down to the repair shop you’re working with. Some replace only the tank, while others will also install a new fuel pump and sending unit. Obviously, the price tag varies depending on which route you take.

Why Replace the Fuel Tank?

Changing the transmitting unit is typically unneeded. It will still perform its function if it is in good condition. However, if your car has a few miles on it (say, 50,000 or more), replacing the gasoline pump is usually a smart idea.

It will already be out, so all you will need to pay for is the extra cost for the component. It is not unusual for a person to reuse the old pump while changing the tank, only to have it fail in the near future. When that occurs, you’ll have to pay all of that labor money again to dump the tank and replace the pump. It’s better to be safe than sorry, so replace it while it’s out.

The symptoms of a bad fuel tank

If the EVAP system test fails, the “check engine” light will nearly always illuminate. When an auto parts shop or technician reads this fault code, it indicates that the gasoline tank itself is the source of the problem.

A faint “popping” sound may be heard in certain vehicles when the leak detection pump, situated within the tank, constantly attempts but fails to pressurize the tank.

If there is a gasoline tank leak, it might result in a rough idle, difficulties starting the engine, and/or noticeably low fuel economy.

Even if a gasoline tank has rusted or corroded on the inside, RepairPal adds that this damage, if there, will not be visible from the exterior of the tank. As the gasoline tank rusts, flakes and other debris fall into the fuel, producing the previously described difficulties.

The process to Bypass a Bad Fuel Tank

Identifying the issue

To discover a leak in the fuel tank, a mechanic will first stop the purge and vent valves and then monitor the pressure using a fuel tank pressure sensor. If the pressure lowers while viewing the findings, even while both valves are closed, this indicates a leak in the system. If the pressure remains as it should, the system does not have a leak, and the next step is frequently to inspect the fuel sensor and valves to ensure they are in good operating condition.

The restoration procedure

Once the gasoline tank has been identified as the source of the issue, the vehicle will be raised and the fuel pump fuse will be removed. When the engine is removed, it is started to assist alleviate any tank and fuel system pressure, and the battery line is detached.

After placing a container underneath the tank, the mechanic will begin draining it, often using a siphon pump. After the tank has been completely emptied, the gasoline lines will be disconnected, if required.

When the tank is assessed to be as empty as possible, all components linked to the tank, including the old gasoline tank, hoses, clamps, straps, nuts, screws, and everything else connected to the tank, will be removed to liberate the fuel tank from the vehicle’s undercarriage. While many vehicles have similar component setups, certain models, for example, may need the suspension to be reduced in order to remove the tank because it is too high.

What is the easiest way to drop a fuel tank?

One method to drop the fuel tank is to remove the straps holding it up and then lower it by hand. This can be done with the help of a friend or assistant.

Another way is to use a floor jack to support the fuel tank as you remove the straps. This method is often preferable because it prevents damage to the fuel lines and other components attached to the tank.

Once the fuel tank is lowered, it can be disconnected from the rest of the vehicle and removed for repair or replacement.

What if it isn’t necessary for them to drop the tank?

If there is an access panel beneath the back seat that enables the technician to remove the pump without lowering the tank, you should expect to save a couple of hours on labor. This should reduce the amount by at least $100.

However, just because the tank isn’t moving doesn’t imply the technician won’t run into the same problem with the sending unit or the locking ring. Nine times out of ten, this is not the case; yet, there is always that one unfortunate individual who is saddled with this problem.

What Other Issues Might I Face?

Rust is the most common problem faced while dealing with gasoline lines. Fuel lines are built of steel, which does not fare well in the weather. These lines rust and become exceedingly fragile. When this occurs, it is extremely simple to break a line merely by moving it, or even knocking a huge piece of rust off may reveal a small pinhole. If this occurs, you will be thrust into the dreadful realm of fuel line maintenance.

If you’re fortunate, you may be able to get away with merely replacing the leaking line. However, if the rust accumulation is severe enough, you may have to replace all of the lines. This might cause the labor time to exceed a day. It may also cause the price to rise beyond $1,000.

If your brake lines, which are often packaged with your fuel lines, are similarly rusty, you may get an estimate to repair them as well. If this is the case, you may want to consider purchasing a new car.

F.A.Qs: How Much Does It Cost To Drop A Gas Tank?

Is it hard to drop a fuel tank?

Depending on the car and how full the fuel tank is, removing it can be tough. However, if you have some experience and the proper tools for the job, taking out the fuel tank isn’t such a daunting task.

Can I drain my own fuel tank?

Using the Fuel Pump to Drain the Gas Understand that not all gasoline tanks can be immediately emptied. This is a model-by-model repair, but it should work for the majority of vehicles. This is the simplest approach to empty the automobile if you can discover your gasoline tank while below the car and unhook the lines and/or little drain stopper immediately.

How long does it take to drop a gas tank?

The time it takes to drop a fuel tank varies depending on the vehicle and the method used. It can take anywhere from 30 minutes to several hours.

Can you drive a car with a leaking gas tank?

A gas leak can be difficult to drive on because it is combustible and provides a slick surface for other motorists. Because gas is so flammable, this is the case. Gas leak fires have the potential for serious burns, bodily harm, and even death, therefore it’s best not to operate an automobile with a gas leak.

When should I replace my gas tank?

The minimum amount of time that manufacturers guarantee their metal fuel tanks is ten years. There will be some variance in how long each individual tank made out of materials such as coated steel or aluminum might last, but unless there is some external damage done to the tank, it should last at least a decade.

Can you drop a gas tank without a lift?

Remove the fuel tank so that it may be lighter and simpler to move. If you don’t have access to a lift, use a floor jack to help steady the fuel tank while you roll it out from beneath the car.

Do you have to drop the fuel tank to change fuel pump?

The fuel pump is usually located inside the fuel tank in most cars, which then means you have to remove the tank so you can reach the pump and clean it. … Doing thisahead of time will make sure there’s less fuel for you to drain when you drop the tank.

Conclusion

In order to get a better estimate on the cost of dropping a gas tank, it is important to consider all of the factors involved. The type of tank, its location, and the company performing the work are all essential in determining an accurate price. From our research, we found that the average cost to drop a gas tank is between $500 and $1,000. If you have any questions about this process or would like more information, please don’t hesitate to contact us.